Moving more minis

I’ve added more pages of pics of my minis to this blog:

Antique Shop

Card Room

Arch de Provence in Quarter-inch scale

Colonial tavern

And a couple new ones:

3D Diner

Yummy Desserts

I’ve had to do a little rearranging of the menus to make everything fit! More to come!

Adding all my minis

I’m in process of moving my big website to a new one, and it means losing the pages that had pics of all my minis. I am moving all of them to this blog / site. It’s not as hard as I feared porting them over, but it takes time. For now I have up the Black and White Room, and about four vignettes. You can see them via menu items at the top of this blog, or in the list of pages down the side. A work in progress!

Or check them out here:

Black and White Room

This Mess is a Place

Moroccan Fantasy


New Orleans Courtyard

Architect’s Scales–A Brief Intro and How-To

If you collect issues of The Scale Cabinetmaker, you’ll find that many of the projects’ dimensions are given in full scale measurements, and it’s up to us to translate that into the scale we want to work in.

You can either do math (divide everything by 12, or 24, or 48, for 1″, 1/2″, 1/4″ scale), or you can save yourself the trouble and purchase an architect’s scale.

An architect’s scale is a triangular ruler with six different scales listed in inches. (Note it is different from an engineering scale, which is metric–get the one with inches, or you’ll be doing a heck of a lot more math).

Photo of my scale from the top (Click pics for larger versions):

IMG_2115 (800x600)

Here it is, looking at the 1″ scale side (sorry it’s a little blurry):

IMG_2116 (800x600)


IMG_2117 (800x600)

How does it work? See the 1 there to the right of the 20? (ignore the 20 for now). That’s the one inch mark–there’s exactly one inch, or one scale foot, between the zero and the 1. To the left of the zero is an inch (a scale foot) broken down into 12 scale inches. (3 inches, 6, 9, 12).

So, if I’m looking at plans for the deck chair, and it shows that one piece is 50″ long, I think, “How many feet is that?” (OK, so you have to do a tiny bit of math).

50 inches = 4 feet, 2 inches (right? I’m an English major).

IMG_2116 (800x600)

I place my scale ruler on my piece of wood, count over from zero to 4 (it’s four real inches, or four scale feet). Then I move the ruler to measure from the left of the zero mark the last two “inches” (scale inches), and there I have my measurement. I have no idea what the actual measurement is (4 1/6 inches I guess it would be), but I don’t need to know that. I know it’s 4 feet 2 scale inches.

It took some time before the lightbulb went off for me. Get a scale, find some projects with real-size dimensions, and practice figuring out how to translate the measurements into one-inch scale.

The great thing about learning how to do dimensions using the architect’s scale is that any project in the Scale Cabinetmaker can be resized for 1/2″ or 1/4″ scale as well! (If you want to do some of those things that small!)

IMG_2118 (800x600)

This is the half-inch side of the architect’s scale. The one scale foot mark is the 10 (because the ruler has six scales, some of the marks are from the scale going the other direction, which drove me nuts at first, until I learned to ignore it). The 2 is the 2 scale feet mark, the next mark is 3 scale feet, and so on.

IMG_2119 (800x600)

Here is the 1/4″ scale side. Ignore the 92, etc, and just use the 2, 4, etc.

Thus, if something is four inches on a side in real life, instead of trying to figure out how big is 1/3 of an inch, you can use the marks on the architect scale to count 3 scale inches and not worry about it.

Clear as mud? It’s clearer when you practice with it. One motivation in making the deck chair and the chest was to see if I could figure out how to mark the dimensions.

Last–The Scale Cabinetmaker does have some fairly easy projects. I look for ones that don’t need a lot of power tools, or have straight lines or rectangular carcasses. The projects contributed by Bill Miller can be done with hand tools and intermediate or even beginning woodworking skills (he also lists his dimensions in inches, so no need for the architect’s scale). I made a backgammon table and 1/2″ scale pool table he designed, and both turned out well!

IMG_6593 (768x1024)