The fireplaces for the Beacon Hill are pretty straightforward, but as the instructions are sparse and have few photos, here’s the fireplace construction:

Fireplace pieces laid out. From top row to bottom: Trim, front, firebox back and sides; base/hearth, sides; top pieces (mantel), which get glued together, flush in back–one is smaller than the other.

Test building: Front goes in slots on hearth / base.

The mantel: Glue smaller on top of larger, centered, and flush at back. Have the “good” side of both pieces on the outside.

Firebox from the back. Sides angle from back to front.

The whole thing roughed together. Larger piece of the mantel goes on top.

Trim goes on front. Note that the trim is flush at the top of the front (not bottom).

I finished my firebox and hearth with brick paper before gluing together. Shot of the angles of the back.

 

I glued my trim on before I glued the piece to the hearth. This is how I discovered that the trim should be flush on top not bottom. (Bottom part of trim does not fit in slots.)

View from top with sides added. Edges of sides go against back of front piece.

Sides glued in place.

Mantel added.

Side view.

Front view of finished fireplace. I finished painting after I glued it together, because I didn’t want it to warp.

Finished and painted fireplace in position in house. The second floor fireplace is identical to this one. I’ll show the third floor one when I get there.

I finished the floor and all the trims (baseboards, cornices, trim around the bay openings, trim, trim, trim. Lots of raw edges!)

Note: I did not use the scrolled “bay window trim” that comes with the kit. For what the kitchen bay one looks like see Beacon Hill: Trimming the Interior. The bay trims go into the front and left bay on this side of the house in the same way as the kitchen bay’s.

Staircase set in place. I still need to finish the staircase opening, add an extra step, and a few other details before I glue it in. Plus I want to make a chandelier so I’m not dodging the staircase when I put it in.

Gathering all the pieces and tools for new chandelier!

Advertisements