Creekside Studio (Much needed break from Beacon Hill)

4 Comments

Taking a break from the Beacon Hill, I built this kit. Creekside Studio by Suzanne and Andrew’s Minis. This took me about a week–it’s 1/4 inch scale. Nice to do an entire build in a week!

Front door and porch.

The back door.

Right side of the house.

Left side and interior.

Suzanne and Andrew offer a landscape base for the house as well, which comes with material to do the dirt and grass. I thought ahead and purchased it when I bought the house kit.

The blank base.

The base provides the height for the porch steps to reach the back door.

I’ve painted the stones on the base here and added grass and dirt. I’ll plant a ton of flowers later–thinking of doing a vegetable garden too.

The “creek” looks like it has water in it. It’s triple gloss sealer.

The full creekbed side of the house.

The back door. I’ll put in bushes, flowers, and other fun stuff.

Right side of the house. I’m thinking of putting the kitchen garden here.

A fun kit, glad I bought it.

Break from Beacon Hill but back soon

1 Comment

This time I did have to take a break from the Beacon Hill. Too much!

I turned to other kits I had bought and stashed. First, a microscale flower shop:

I think one appeal of microscale is that you can build a whole house and landscape it in a weekend! That and it doesn’t take up much display space.

These both are kits from Robin Betterley: https://www.robinbetterley.com/collections/watercolors

Next, I started a quarter inch scale kit from Suzanne and Andrew’s that I’d been hoarding for a year or so.

This kit is called  “Creekside Studio”  in 1/4″ scale. Very small, a first floor and a loft, the first floor divided into two rooms by a cabinet. (I see this kit still for sale on Suzanne and Andrew’s site, so if interested, grab it. Their kits get retired.)  Creekside Studio by Suzanne and Andrew’s Minis

I’m almost finished with the structure. I’ll post pics when I’m done. This one is taking me about a week to finish (maybe two).

But I’m still plugging away on the Beacon Hill. I now have interior trim done for the second-floor room (will be the bathroom):

and the left half of the top floor, which will be a bedroom.

One reason for my slowdown, other than dollhouse fatigue, is having a lot of work to do at my job (real life). Minis had to go on the back burner for a while, always a bummer.

It’s also nice to do simple kits to step back from a more complicated one. Suzanne and Andrew (http://andrewsmini.com/miniatures/ ) and Robin Betterley (https://www.robinbetterley.com) have fun ones that look great when finished. (I promise I don’t work for them or do endorsements for them; I just like their stuff!)

I hate to admit it, but I can’t resist a great kit. I keep telling myself I will design my own houses, and then I see a fantastic, well-designed kit, and in it goes to my stash. But I swear I will make them all! I decided a few years ago that there’s a difference between collecting and hoarding …

More Beacon Hill anon.

 

Quarter inch scale–taking a break

Leave a comment

Taking a break from dollhouse building to indulge in this cute kit from Robin Betterley. I intended to buy the “tin” only and decorate it myself, but I really liked the interior furnishing so I got those kits as well.

IMG_3049

The “tin” is made of wood, painted, and with art to look like a large spice tin.

IMG_3051

IMG_3052

IMG_3050

Everything comes with the kit–wallpaper, flooring, outside art, plus an LED light and battery box (with instructions) to light the tin’s interior.

IMG_3109

Tin lit up .

IMG_3106

This is one of the kits made for this tin. You get everything–hutch and chair and all the accessories (birdhouses, baskets, postcards, seed flat, etc), including a rug.

IMG_3108

The kit inside the tin.

IMG_3110

I have two more kits to put together to finish the inside. Any quarter-inch scale furnishing will fit, though, or it could be a display box for any kind of collection. Neat!

This kit is part of a line that looks like it will have a tin for each season. This one is May (Mayblossom Morning)–I liked the spring theme.

When I get the hankering to do the next two kits, I will and post the finished pics. For now, it’s time for the half-scale Bungalow, and to keep going on the one-inch scale garage.

Shoe House Landscaping

1 Comment

IMG_2790 (600x800)

I had a little challenge with the final exterior on the Shoe House, because I had wires to hide. I had purchased this wooden base from Michael’s a while back, and realized that the hole in the bottom (the base came like that) would be perfect.

IMG_2789 (600x800)

I gathered all the wires (splicing on more wire where they weren’t long enough), stuffed them through the hole, then pieced artificial grass around it (the German grass sheet bought at Hobby Builders Supply).

IMG_2788 (600x800)

IMG_2787 (600x800)

Ready for landscaping and finishing.

IMG_2792 (600x800)

Shoelace is a piece of grosgrain ribbon that came with the kit. I painted it black and dabbed on polka-dots… or rather, Mrs. Mouse did. She didn’t like it plain.

The most amazing thing about this ribbon is that it was lying about loose while my entire real house got packed up and then unpacked (for reflooring). When I needed the ribbon, I found it right away! That will never happen to me again.

IMG_2791 (600x800)

The rest of the landscaping is model railroad supplies, painting, and glue.

Bushes around the base, which hide the wiring and hole are clumpy green model rr landscaping stuff. I tore pieces to the size I wanted, dipped in quick-dry tacky glue, and stuck it around the house. Then I dry-brushed blue, pink, yellow, and red for flowers.

The vines: I used vines to cover the wires coming out of the house. Here’s how I did it:

I took 0000 steel wool and pulled it apart until I had very thin strands but still a bit meshed together. I painted them green. You could spray paint these, but slathering on dark green acrylic craft paint worked fine.

I glued the painted strands of steel wool to the house where I wanted them (over the strands of wires). Once that was dry, I dribbled tacky glue on the strands (a small area at a time), and sprinkled loose green model railroad landscaping foam over them. When dry, I shook off the excess. Did this until I had fairly uniform green all over the vines.

For flowers, I dabbed the vines with tacky glue (I use Aleen’s Quick-Dry tacky–it’s a white bottle with a silver label), and then dribbled on colored loose model railroad foam. I’m finding that mixing colors (blue with white, red with yellow) makes the flowers look more natural and realistic.

IMG_2790 (600x800)

And that’s it! The inside still needs finishing touches, but I’ll get there. I can never build a house in one go .. I have to work to a point, put it aside, and come back to it. That way I stay excited about the project instead of burning out.

I have another 1/4 scale project I’m working on, then I think I’ll return to 1″ scale for a change!

%d bloggers like this: